首页/师资力量/教师名录/机械电子工程

总体介绍

姓名:陈军杰
职称:副教授

学习经历

1987~1996,

University of Illinois at Urbana-Champaign (伊利诺伊大学香槟校区) 航天工程系 博士

1985~1987,

Wichita  State  University, Wichita, Kansas, USA  (威其塔州立大学) 航空工程系 硕士

1979~1983,

台北淡江大学 航空工程系 本科

工作经历

2016年2月至今,汕头大学工学院副教授

2012年1月至2016年1月,浙江工贸职业技术学院助理教授

2008年7月至2011年5月,皇家不丹大学工学院副教授(senior lecturer)

2002年2月至2008年6月,国立澎湖大学工学院助理教授

2000年2月至2002年1月,兰阳技术学院电子工程系助理教授

1997年10月至2000年1月,台湾航空器适航验证中心助理工程师

科研情况

 


 

研究兴趣

最优控制, 机器手臂,轨道力学

证书

  1. Certificate of course completion, 124 hours in “B737-800 Airframe/Powerplant Maintenance” from Nov. 02, 1998 to Nov. 25 1998. China Airline, Taoyuan, Taiwan.
  2. Certificate of course completion in “the MD-90 Intensive Type Training Course” from Aug. 24, 1998 to Sep. 05, 1998. Evergreen Aviation Technologies Corp., Taoyuan, Taiwan.
  3. Certificate for “Aircraft Certification Conformity Inspection Course” April 24, 1998. U.S. Federal Aviation Administration, Transport Airplane Directorate, Taipei, Taiwan.
  4. Certificate for “JARs/Aircraft Certification, Compliance and Application” from Nov. 30, 1998 to Dec. 11, 1998. European Academy for Aviation Safety, Taipei, Taiwan.
  5. Certificate for “the Aircraft Certification Designee Management Course,” May 15, 1998. U.S. Federal Aviation Administration, Aircraft Certification Service, Rotorcraft Directorate, Taipei, Taiwan.
  6. Certificate for “the Aircraft Certification Service TSO Training Seminar,” from May 20, 1998 to May 21, 1998, U.S. Federal Aviation Administration Aircraft Certification Service, Taipei, Taiwan.
  7. Certificate for “the Aircraft Certification Systems Evaluation Program Workshop,” Feb. 12, 1999, U.S. Department of Transportation, FAA Academy, Taipei, Taiwan.
  8. Certificate for “Aircraft Noise Measurement and Evaluation Techniques for Engineers, Course 28331,” Apr., 1999, Acoustical Analysis Associates, Incorporated, Los Angeles, CA, U.S.A.

 

教学情况

 


 

教授课程

  1. 2016-至今, 自动控制原理,复变函数,数值分析,控制系统 ,线性系统,汕头大学
  2. 2012-2015, 面向对象C#程序设计,ASP.NET程序设计,数据库,浙江工贸职业技术学院
  3. 2008-2011, 讯号与系统,数位讯号处理,最优控制,皇家不丹大学
  4. 2002-2008, 工程数学,线性系统,台湾澎湖大学

 

论文发表情况

 


 

毕业论文

 

  1. Chen, J-J. F., MS Thesis, Title “General Aircraft Controls”, Wichita State University, Wichita, Kansas, USA (Adviser: Dr. Andrew Craig.) 1987
  2. Chen, J-J. F., Ph.D. Thesis, Title “Neighboring Optimal Feedback Control for Trajectories Found by Collocation and Nonlinear Programming,” University of Illinois at Urbana-Champaign, Urbana, Illinois (Adviser: Dr. Bruce Conway.) 1996

 

 

论文发表

期刊论文

  1. Pan Xiuqiang, Mei Chengcai, and Chen Junjie (Jyun-jye F. Chen), “Least-energy Maneuver of Five-link Manipulator Constrained within Tunnel Space Using Direct Collocation,” 系统仿真学报, Vol. 27, No. 8, August 2015, pp.1844-1852.
  2. Mei Chengcai, Pan Xiuqiang, and Chen Junjie (Jyun-jye F. Chen), “On the Collision-Free Robotic Manipulator Welding Using Direct Collocation with Nonlinear Programming Method” (in Chinese), 浙江工贸学报, Vol. 13, No. 2, June 2013, p.41-45.
  3. Pan Xiuqiang, Mei Chengcai, and Chen Junjie (Jyun-jye F. Chen), “A Study on the Lagrange Multiplier of Optimal Interception/Rendezvous Maneuvering Using Direct Collocation and Nonlinear Programming,” (in Chinese), 计算机软件应用, Vol. 30, No. 5, May 2013, pp.140-144.
  4. Mei Chengcai, Pan Xiuqiang, and Chen Junjie (Jyun-jye F. Chen), “Five-linked Manipulator Arm Rendezvous Optimization Using DCNLP” (in Chinese), 小型微型计算机学报, Vol. 33, No. 12, December 2012, pp.2749-2752.
  5. Pan Xiuqiang, Mei Chengcai, and Chen Junjie (Jyun-jye F. Chen), “Solving Five-linked Manipulator Arm Interception Problem with Optimal Control Techniques,” (in Chinese), 系统仿真学报, Vol. 24, No. 9, September 2012, pp.1772-1776.
  6. Jyun-jye F. Chen, Poshi Lin, and Yeshi, “Three-link Manipulator Optimal Path Planning Using Direct Collocation and Nonlinear Programming” Journal of Advanced Engineering, Vol. 6, No. 3, June 2011, pp. 177-182.

 

会议论文

 

  1. Ming-yu Su, Jyun-jye F. Chen, “Least-energy Path Planning and Oscillation Analysis of Robotic Manipulator Using Direct Collocation with Nonlinear Programming,” The 2017 International Conference on Modeling, Simulation and Control of Discrete Event Systems, I-Lan University, Yilan, Taiwan, March 13-17, 2017.
  2. Jyun-jye F. Chen, Dawa, Yeshi, Nidup, and Sangay Nidup, “Metamorphosing a Five-link Robotic Manipulator Equipped with Universal Joints into One with Regular Joints Using Direct Collocation,” The 4th International Conference of Software, Knowledge, Information Management and Applications (SKIMA), August 25, 2010, Paro, Bhutan.
  3. Jyun-jye F. Chen, Tsun-feng Huang, Dawa, and Nidup, “Multiple-link Robot Manipulator Optimal Motion Design Using Symbolic Language,” The 4th International Conference of Embedded Systems, July 14, 2010, Coimbatore, India.
  4. Jyun-jye F. Chen, Pohsu Lin, and Yeshi, “Three-link Manipulator Optimal Path Planning Using Direct Collocation and Nonlinear Programming,” The 18th National Conference on Automation Technology, May 25, 2010, Chongli, Taiwan.
  5. Chen, J-J. F., Bruce A. Conway, “Optimal Maneuver Sequence for Koreasat 1 Recovery,” AIAA Space Flight Mechanics Conference, Feb.,1997, Huntsville, AL.

 

教育背景

 学习经历

1987~1996,

University of Illinois at Urbana-Champaign (伊利诺伊大学香槟校区) 航天工程系 博士

1985~1987,

Wichita  State  University, Wichita, Kansas, USA  (威其塔州立大学) 航空工程系 硕士

1979~1983,

台北淡江大学 航空工程系 本科

工作背景

工作经历2016年2月至今,汕头大学工学院副教授2012年1月至2016年1月,浙江工贸职业技术学院助理教授2008年7月至2011年5月,皇家不丹大学工学院副教授(senior lecturer)2002年2月至2008年6月,国立澎湖大学工学院助理教授2000年2月至2002年1月,兰阳技术学院电子工程系助理教授1997年10月至2000年1月,台湾航空器适航验证中心助理工程师

科研项目

科研论文

科研成果